VXC Series
General Specification
How many speakers are included in one carton?
A carton of the full-range VXS/VXC models will contain 2 units, a carton for the VXS10S subwoofer models will contain a single unit.
Are the speakers paintable?
Yes. For details, please refer to the "Speaker system painting guide".
How can I switch between 70V/100V and Low/High impedance operation?
Each model features a rotary tap selector switch. For VXC models this is found underneath the grill on the baffle plate, for VXS models this is found on the rear panel.
Is it possible to rotate or remove the Yamaha logo of the VXS/VXC Series?
Yes, rotation and removal of the logo are both possible.
Is overload protection used in the VXC/VXS Series?
Yes, a PolySwitch is used to protect the drivers.
What thickness of ceiling board can the VXC Series be installed into?
From 5mm to 35mm. Please note that the attachment mechanism uses a screw type clamp to decrease the installation time.
Is it possible to attach a safety wire to the VXC Series?
Yes, an eyelet is provided to attach a safety wire (*safety wire is not provided).
VA Version
What is the difference between VA versions and standard models?
The flammability rating, IP rating and frequency characteristics have been changed to meet EN54-24 requirements. The VA models share the same high quality audio characteristics as the standard models, allowing for dual use in both music reproduction and emergency Voice Alarm applications.
What Voice Alarm standards do the VXC/VXS VA Series comply with?
Certified to EN54:16:2008. Complies with EN60849:1998 and ISO7240-24.